
SnP Filename convention:

S_PExxxxx_Temperature_VDD_VCTRLHi_VCTRLLo_LsPin_Voltage_OnPath_SnP_Serial_#_LOT#.s13p

Example file:

S_PE42412_AMB_3p300V_1p170V_0p000V_LS_0_RF1_S13P_SN_1_A0250A.s13p


S = Scalar de-embedding of PCB trace S-Parameters has been applied to the data
    (if S is not pre-pended to the filename, the data is not de-embedded)

PExxxxx = Product number
Temperature = Temperature of DUT when measured
VDD = VDD of test iteration
VCTRLHi = CONTROL VOLTAGE HIGH
VCTRLLo = CONTROL VOLTAGE LOW
LsPin_Voltage = Voltage of the LS pin (eg- LS_0 means LS pin is set to low)
OnPath = The on path of the switch
SnP = Number of ports in S-parameter file (eg-S13P means 13 ports including common port) 
Serial_# = serial number of part tested
LOT# = lot number of part tested

____________________________________
VNA port definitions:
Port 1 = RFC
Port 2 = RF1
Port 3 = RF2
Port 4 = RF3
Port 5 = RF4
Port 6 = RF5
Port 7 = RF6
Port 8 = RF7
Port 9 = RF8
Port 10 = RF9
Port 11 = RF10
Port 12 = RF11
Port 13 = RF12

____________________________________
PCB Part Number = PRT-66124-01
PCB Date Code = 1632
____________________________________
De-embedding Date = 01/12/2017
Engineer = RP



